There’s a bit more changing on the web than what you may expect.

The web moves so fast that we ditched W3C standards for the WHATWG living standard because it took too long to release new features. I guess the “move fast and break stuff” stood too much in contention with W3C’s vision of a standardisation track, and it did take a good while in the past. Anyhow, the last updatebto that stabdard was yesterday. https://html.spec.whatwg.org/multipage/document-sequences.html

Features like WebRTC, HTTP/3, CSS grid, JavaScript decorators, … do not come for free. This is just a tiny fraction of what appeared in the past few years. The web is a highly evolving platform which (used to be? is? aims to be?) backwards compatible. This even ignores updates for required maintenance due to base platform APIs or frameworks changing.

It could be very smart to bring its evolution back under W3C so it would move at a more achievable pace with an equal voting process, but that’s not the case today and I doubt it will happen any time soon.

In the coming years, building or maintaining a browser engine will be expensive.

noisetorch does an ok job for video conferences and works on your speaker (easier on you) and on your microphone (easier on them). We often use it to limit keyboard noise during meetings.

I have not had many issues in the past 15 or more years myself running Linux exclusively aside from a shorter Macbook period. Perhaps I have just been lucky.

We sported (in guessed cronological order of first buy): Dell, HP, Lenovo, Slimbook, Tuxedo, Starlabs, BTO all running Linux at our company. We have not had big issues with any except for keyboard on a Dell, Tuxedo, Slimbook and cooling on a Lenovo. Since I chose the Slimbook many have followed on the path of smaller suppliers and I think we rarely buy from the big makes now.

I have been very happy with slimbook. I came from a macbook (bad idea) with the bad butterfly keyboard and the slimbook was a big upgrade on that front. It’s still not the greatest keyboard for some but I do like it. I have been wanting to buy a new one but whenever something broke or was insufficient I could either upgrade (2 x nvmeSSD slots and RAM can be replaced) or they still supplied spare parts when I sent them an email (keyboard replacement after 4 years). I wanted a framework but Slimbook has offered me spare parts as needed for longerbtham could buy a framework and the slimbook still works well. Plus it’s less expensive. Replacement of the keyboard was not toolless requiring glue to be heated but I did manage to quickly do it with a sleepy head at night. I’d buy their new 13" if this one would be out of service. I’d buy one now but it feels such a waste.

Things I did not like 6 years ago: webcam and microphone of lesser quality, display nice and matte with good color rendition but lower resolution than I’d prefer, no USBC charging on USBC port. Display and USBC are resolved on the new models, no clue about webcam and microphone.

Not CoreXY but you may want to check out FLSun’s delta offerings too.

I have an older one and it has served me well. I bought a QQS pro (I think) for tinkering. It worked well out of the box but I could not resist changing the stepper drivers, installing Klipper, changing the hotend, … It still works well, just faster.

Looking at the few reviews of what they have today I’d buy again but would try not to swap out parts. That or the Prusa you’re looking at.

When the battery gets fully discharged it degrades much faster.

I’d be searching for what’s draining the battery and in the meantime I’d add a battery disconnect switch for these periods.

Agree. They’ll surely to pay the cost and they have a proven track record on handling any potential lock in.

The Docker runtime is probably ok as it is a tool instead of a community. The registry has a community aspect and is where we’ll likely see exploitation of vendor lock in. Luckily Docker was grounded well and you can set up your own registry.

Answer: they’re holding up just fine

Check out termux so you can combine the native install with tools such as Git to have a fuller installation. org-roam seems to work. No native compilation but performance is still ok. Also turn on touch-screen-display-keyboard and touch-screen-precision-scroll.

First off, it looks good as it is. Well done! Also, it works and that’s the important bit. Some things which help me:

• use equality constraints instead of repeating measurements for radii and lengths
• fillets can be added after creating the main shape, this simplifies the sketch
• if you know this will be mirrored, draw a quarter and mirror the extruded body in part design (you could use multi-transform here)
• use formulas, spreadsheets or reuse named distances if you want to change things later
• make extensive use of the Part Design workbench but sometimes dabble in another workbench because when they click you’ll unlock a new set of combinations and turn FreeCAD into a sort of swiss army knife

Congrats on your first model 👏

I have since tried to browse Lemmy on it a few times. The lack of emitted light and terrible color rendition make it more boring. I guess that’s the point, a more boring device. Pictures are a problem due to dithering and bad color rendition.

deleted by creator

Updated my comment to reflect this. Thanks for clearing out the confusion.

There is a standard connector which existed before big screens landed in cars, the OBD2 connector. Dongles are cheap and you can read the output from your phone or computer. Some dongles support bluetooth. The connector is mandated in some markets and I guess that makes it less interesting to add a redundant interface inside of the car. It’s fun to try if you’re interested. Manufacturers can extend the error codes IIRC.

Tesla has a service mode on the display through which you can scan the car for faults, run a battery test, … It is password protected but the password is publicly available.

This is a great overview. Some extra notes:

Linux will be sluggish running “live” off the usb stick. Do poke around but know it will be faster running from the laptop’s SSD.

For a way to install onto a USB stick, check Balena Etcher. I guess there are better tools out there but this worked for me every time I tried it, seems to work on windows too, and I found it intuitive.

FP5 using e/OS here showing the same artifacts.

Naah it’s ok. Rigged elections are akin to saying something awful you didn’t mean when someone pissed you off. Can’t put the toothpaste back into the tube, they say. But at some point you do have to clean it up and take another tube lest your teeth will rot.

I run e/OS on a FP5. I ran e/OS on a Essential PH-1 before and going back to a phone with Google installed just didn’t sit right with me. I did not feel like I could trust the device even after trying to toggle as much of the creepy spying off. As if there’s still someone probably looking over your shoulder because you configured something wrong.

It is not perfect, but it is easy to use and full-featured. All regular apps feel great and battery life is good. I still use specific Google services (such as the calendar for work) but no specific Google apps. I guess Maps is the biggest challenge now but alternatives are good enough to get around with.

You can run Android apps. Not sure about payed Android apps. I try to install FOSS apps through the integrated f-droid store if they’re available there. Installing app store apps sometimes fails because Google blocked the installer. I could install everything so far when needed (including banking apps and specific apps for the vacuum cleaner and such). Sometimes the Android app store apps don’t update for a while and I don’t notice.

I don’t use Murena’s services but self-host Nextcloud. Based on the information they send I think they’re doing a great job for their size.

I flashed the FP5 myself with a beta of e/OS when it was just out because the other phone was broken and (again) I did not feel right with the spying demon in my pocket with native Android. You could flash your device too.

It’s comfortable on this side. If you have further specific questions, shoot.

It’s very interesting to scroll through and I could easily find my way in it. It is also very fast. Thank you for sharing.

I have the tendency to lock everything in place and fixate it based on some logic. For example: I would constrain Sketch010 for PocketGlandHoles so each of the holes is exactly the same distance. Lack of experience makes me want to have a parametric model so I can move things around until I make up my mind. Looking at this file however, it may be better to just model again when things change.

I’d love to have another peek if you screw up with this approach or if you’d have a finalized version.

I’d love to see the FreeCAD files and possibly see the progress too. Looks like a good project to learn from.

I’ve only seen my own (sometimes messy and slow) FreeCAD files and I also don’t get round to publishing anything either. Last time I made an enclosure I made a mess where it became slow because a lot was recalculated based on the position of the components and it had some curved surfaces. I do remember making clips (did not work well) and a ridge (that held up a bit better). Would use screws next time like you’re doing here.