• 0 Posts
  • 47 Comments
Joined 2 years ago
cake
Cake day: June 25th, 2023

help-circle
rss

  • typically you only need one power supply to run it, once you move to redundant power you can use the second one in case the first one fails. when you plug both in it will just balance across both until one fails.

    in my opinion, hardware should only be hypervisors that run virtual machines, then you can provision VMs, similar to using VPSs. going this route you will need a vga monitor for initial setup, eventually everything is done over the lan with a web ui or ssh.

    i use proxmox which is Debian based for the hypervisor.

    As far as what you do with it, is that you can in theory replace the VPSs or test software in your lan.

    to compare, i have my router (vyos), homeassistant, a docker server for hosting small services, a network lab (gns3), windows and mac VMs, and more running on a cluster that is using similar hardware.













  • the questions of can they spy, and will they spy are different questions. at some US ISPs (at least the one i am at) the modems usually are only monitoring performance, ie number of packets, errored and discarded packets for troubleshooting. as far as the modem which i will assume is just a layer 2 bridge to your provider, usually not a whole lot going on there due to costs of the hardware. where the privacy violations are going to occur in the access equipment or core. this is what your modem connects to, then your traffic crosses on the way to the “greater internet” if your not using a vpn to outside of your provider, there is no way around it, they can and probably do tap into what your doing. a lot of them it may not be overly nefarious, i know my company does not sell customer data, and we generally only access it for troubleshooting and bandwidth analysis for upgrades, or as ordered by a court for law enforcement.

    if you use a router from your isp almost every manufacturer is trying to sell all these different analytics and dpi that basically tells us what websites customers are visiting and how much/type of traffic to those sites, but directly from the router. same, or greater level of privacy violation as that can see local traffic on your lan, as well as watching wifi connection strength and scanning to see air quality and neighbors for “troubleshooting” or to sell access points.



  • make sure it’s configured for clean shut downs before your battery runs out, auto power up on restoration, and hope it doesn’t happen. you will eventually have an outage that outlasts your batteries.

    I have a large string of batteries from an old telco office, that runs my rack for 14hrs (calculated, I shut everything down around this time) and that did not last for the 2-3 day outage we had after a storm. Without a generator, you will inevitably have an outage, but if you are prepared, then you can mitigate any damage. use NUT if you need to shutdown or power multiple devices from one monitored UPS