Sam Vimes
- 0 Posts
- 21 Comments
Cutting off your arm isn’t necessarily illegal (didn’t look into that specifically, and it may well be), but from my quick googling is, legally required to be reported by most if not all medical professionals. That report will almost certainly fall well within the rules of what will put you into a 72 hour involuntarily psychiatric hold.
So… Cutting your own arm off, regardless of legality, is likely to lead 72 or more hours of imprisonment.
I don’t know where exactly the line between cutting your own arm off for fun vs. to study it vs. self treating with homemade cancer drugs falls on the danger to self and others scale. My line would likely be a lot closer to ‘do what you want to do’ than most judges, but I do think cutting off your arm for most any reason is a reasonable bar for some outside inquiry, from a mental health standpoint.
Just noodling here as well.
Likely answer —we’re being nerds and reading too much into it.
No—
—3 lbs of thrust isn’t going to be happening, speaking from experience with model planes.
—3lbs of the air inside is compressed and weighs more is even farther from possible.Likely—
—It only has the battery, fan, whatever when it’s running, and they don’t count that when it’s uninflated for some reason. Like how cars have dry weight, curb weight, and gvrw.
—somewhere in the spec sheets, someone made a mistake, two people worked on things and rounded differently, some other clerical/communicative error.
I definitely recommend Baba Is You and FEZ as well. Similarly to FEZ there is a mobile game Monument Valley (and Monument Valley 2) which I adore. It’s spendier in $/time, but I find is highly worth it.
Bastion isn’t a 2D game, but I’d like to recommend it while I’m at it, it’s play is perhaps close enough, and it’s stunning.
I agree with Car in that you should talk to them, regardless of how hard it is before modifying anything.
Depending on design, pliers could bend all the points to face downwards.
That looks like maybe the opposite of what they need, that says it doesn’t affect normal operation, just boosts the ring. That website looks like it’d have something to fix the issue though.
I’m confused by the it in your last sentence.
Using a screen recorder (there’s a built in one in the Xbox games app depending on version of Microsoft, or if not, people always seem to use FRAPS) to capture whatever is in the window to get more information could help.
Someone else will likely be along shortly with more helpful info.
People are colder now, looking like maybe around 97.9 average. But you’re still chillier than most.
Any plastic sheeting that’s easy to bend with or without heat could be a decent option that doesn’t have high tool costs/skill requirements.
On a mostly unrelated science note:
Whatever compression happens to that thumbnail, on my phone at least, does some wild things to the rats face. Interesting how the different fur size/texture/focus interferes with the the compression.
A related article linked inside that one that lists the most expensive keywords to buy ad space for is absolutely shocking.
Imagine paying Google over $1000 because someone visits your website.
Kinda makes me want to Google some maritime accident lawyers and who knows, MLMs and essential oil charlatans and sow a little mayhem. Although is siphoning money from scummy MLMs to scummy Google even a net bonus?Article:
https://blog.hubspot.com/marketing/most-expensive-keywords-google
Oh, regarding the burned spot, if the coil failed because it picked up lint, that burned on, insulated/heated up more from the lint catching fire/whatever, bending the coil outwards could actually make it more likely to catch lint/whatever. No idea with your dryer if that chance is better or worse than the possible benefits of spreading, just a thought.
Some greases are incompatible, and not cleaning thoroughly causes them to react chemically and cause issue, but unless you’re in that situation, you don’t need to clean super well.
It’s always hard to decipher poor English, but that does seem possible. If you have a multimeter, plugging the socket into a cable would at least allow you to verify the ground and +5v easily. The data etc pins should be doable too, by using a USB A to C cable, and doing a continuity check to the pins inside the USB A side, which would be easy to look up reliably.
As far as swapping the wires around in the plug, that’s one of the easiest plugs to do it with. If you do need to, you’ll be able to.
If the wires are indeed arranged in the wrong order, but would otherwise be work, popping the individual sockets out and rearranging them is actually quite easy. You just need to either pry the little plastic tabs from the the outside or stick a sewing needle inside, and they should slide out fairly easily. If implementing the sewing needle, it often bends the little metal tab out of the way, and you’ll want to tweak it back with the needle before reinserting in the right slot.
The fact that phones haven’t been able to to this easily/natively/what have you is wild. Similarly, the fact that you can’t use old tablets as external monitors without, in my experience of quite a few, significantly buggy software that’s got significant lag in the best of times, is pretty wild. Sure, the technical hurdles aren’t small, but damn.
I’ve got a reasonably high end newish tablet (Galaxy S7+) that I can use miracast to use wirelessly as an extra PC monitor. It works quite well… if I’m near to a high quality new router. But can I just plug the tablet in and use it as a monitor with my laptop? Not remotely well.
It’s been a year or two, maybe I should check for new software again.
The cool thing is that they’re floating because of gravity. Specially, the thing they’re floating in is heavier than they are, so the float medium gets pulled underneath the object.
By free search allowance, do you mean the one time trial of 100, the 300 per month if you’re paying $5, or something else?
While there is a certain level of innate technical mindedness that people have… Being willing to try to fix it, and the lessons you’ll learn from either fixing it or not is huge. Regardless of outcome hopefully the experience will be somewhat fun and pay dividends in terms of being able to recognize where vacuums get bound up with clogs, hair, etc. Occasional deep cleaning will make all the vacuums in your future live longer and suck harder.
Projects that are ‘either it gets fixed or tossed’ are great, there’s so little pressure, and so much you can learn.
Feel free to ask more specific questions if you get deep inside it and come up with them!
Depending on the level of quality you’re looking for, that could be a very doable project, or a mistake, only you can find that out! Based on your questions, I’d have some reservations about tackling that.
My specific thoughts: Figure out if it’s custom to that wall forever, or has any possibility of being used elsewhere in whole or in part. building it in chunks that attach together is a good idea regardless, for ease of build/if anything needs to be changed later.
Those are some pretty wide shelves up top, and you’ll definitely want to consider how much weight they’ll potentially hold, and if they should be very thick or have additional support in the center.
Hiring someone to do all of it, or just a bit of design/consulting isn’t a bad call depending on your skills and quality desired.
The other suggestions of find some furniture (IKEA or other) that checks enough boxes with some minor add-ons/modification is a good option as well.