I feel a bit like I’m slinging hard drugs here, but might I also suggest RimWorld and Factorio?

Got a PineTime for Christmas and so far been very pleased with it. I found the PineTimeStyle watchface and it’s been a bit like coming home to Pebble, but I do miss the wide array of watchface choices and effortless customization.

I wanted to echo this by saying that my lab stated as 4 bay Qnap NAS and evolved into repurposed consumer hardware as my interests and needs changed. My current server is an Optiplex that I bought for being small, quiet, and hanging lots of cores and my NAS is just my old gaming PC build with an HBA card (for extra SATA lanes) stuffed into a fancy case. A server is any computer that you say is a server (ideally one with functional network connectivity).

I’ve got a Steam family going with my siblings and it makes me feel significantly better about my backlog, because even if I don’t get to it there’s probably something for everyone in the mix somewhere. Plus every now and again it’s nice to break out a random indy game that nobody’s played and just collectively suck together.

Boost’s ads are mostly there to support the developer, but a one time purchase ($5 irrc) absolutely makes them go away.

That is why one must also consider the relative dimensions in space when constructing a time machine…

Actually, now that you mention it, Worm is this to a tee. Worm is still probably one of my favorite reads to date; highly recommend (it’s like a The Boys with less evil corporations and more X-Men)!

Also a 2.4 owner, I bought the 350 LDO kit from Fabreeko and it was delivered back in August. Getting it assembled and dialed in was certainly a process, but aside from that it’s been an absolute workhorse (I think I’ve got something like 200+ hours of print time in; completely blows my Thessian Ender out of the water in terms of both speed and reliability). You certainly can tinker with it and make it a project printer, but they print really well stock. The only mod I’d say is anywhere near required is swapping out the magnetic bed meshing sensor, only because the sensor readings tend to drift as the sensor gets hot. You can totally work around it, by waiting for the printer to warm all the way up or cool down to ambient before printing, but I’m impatient plus the mouse switch mod (Klicky) tends to be more reliable and accurate (plus it’s temperature agnostic).

Don’t get me wrong I’ve totally modded mine: swapped out some of the plastic parts for metal ones, added a brush to clean the nozzle before my print (makes for more consistent Z heights), replaced the panel clips with snap latches, but none of it was required to make the printer print better (mostly just to make maintenance easier and partly because it looks cool).

The new hotness in the open source MMU space is ArmoredTurtle’s BoxTurtle project, which seeks to be an open source equivalent of the Bambu AMS. I’m still working on the parts for mine, but from everything I’ve seen the build is way less fiddly (and as a result more reliable) than the ERCF.

Seconding kit Vorons. While they certainly aren’t the cheapest option, they aren’t that much more expensive than other higher end core XY machines. Fabreeko* has the 250/300mm Trident kit at 1.2k and 350mm 2.4 at 1.4k + an extra $150 or so for printed parts. Compared to the new Core One at between 950 - 1.2k or the X1C also at 1.2k you’re looking at an extra $150 to 350, but that also comes with build volume increases (both the Prusa and Bambu are at roughly 250 mm³). Definitely wouldn’t recommend them as a first printer, but Vorons are shining examples of what’s possible with open source (and they’re absolute workhorses too).

* Highly recommend them with glowing praise for being all around fantastic (they also run sales on the regular, though kit deals are usually reserved for special occasions like black Friday, or Clee day)

That’s awesome! Wishing you both the best!

Lol, it actually kind of is: https://en.wikipedia.org/wiki/Max_Steel

deleted by creator

Migrating my laptop to Ubuntu and literally just ran into this with Thunderbird- the profile is in the Snap directory instead of the parent home folder like the docs say.

deleted by creator

Echoing the other comment, I loved my Pebble because it was a smartwatch that was a watch first and foremost and everything after that was added to make life easier (rather than to pile on selling points that someone might want but that nobody needs). For example, the thing had a week long battery life (irrc the first gen iWatch had something like less than a day), but even when it hit the bottom 10% of the tank, it turned off non-essentials (like Bluetooth, calendar, customizations, etc) and just kept going on a default watchface. The UI was simple, easy to navigate, and generally useful. Physical buttons meant that I never had to fight with a touchscreen to clear notifications or check my calendar.

Plus the whole thing was stupid customizable. On the software side, the community grew a fairly sizable market for watchfaces to show pretty much whatever suited your fancy (TimeStyle was always one of my favorites, but I was also fond of this Pokemon one). On the hardware side, the watch used a standard 20mm band so you could go as far as to match it to your outfit if you wanted (I had a nice metal band to go with my Steel so I could dress it up for college career fairs (and have my calendar send me a reminder when it was time to duck off to class)).

E3D makes pretty decent stuff and is based out of the UK- it’s just annoying and expensive to get ahold of everywhere else (insert generic grumbles about Revo nozzles). Otherwise, I’ve had good luck with Phaetus nozzles, but I’m not sure that pricing/ availability looks like in the UK.

Lemon it’s January.

Why do you print like you’re running out of time?

Not the original poster, but it’s on the British Museum’s channel: https://youtube.com/watch?v=WZskjLq040I