Hello everyone! I hope to be posting in the correct place, if not please tell me and I’ll delete this. I have a W11 VM on my EndeavourOS KDE laptop that I use because of some software I need for university that does not run under wine (LabVIEW and Keil uVision). The VM is running on virt-manager (QEMU KVM) using the virtio drivers, and it works really well (I mean, to be windows). The only problem is that today I run a windows update and… sbem, BSOD after reboot. The automatic diagnostic fails to do anything, uninstalling updates fails, of all possible recovery options the only one that does “something” is the command prompt, that I have 0 experience using. This was the first time updating since I created the VM a few weeks ago. Now my question is: is this fixable? Is there at least a way to recover my files, perhaps using the cmd? Thanks in advance to everyone!

EDIT: I managed to get my files back by adding a new CDROM device in the VM with a live xubuntu iso. Then from Windows recovery shit reboot into BIOS and select that device to boot from (in my case CDROM 3), then navigate to the Users/thenameoftheuser folder and backup on a USB or something all the data you need. I’ll try now to fix the windows installation without fearing the loss of my data… Lesson learned, never trust windows neither inside a VM, always better to keep important data in a separate disk (like shared memory) so that in case of VM failure they are safe in a different place
thanks to everyone!!! marking this as solved as my data are safe now, I’ll update if I’ll achieve to fix windows (perhaps by reinstalling)

  • @phx@lemmy.ca
    link
    fedilink
    76 months ago

    You can boot the VM from a liveCD ISO and then mount the drives to extract files (share a USB storage device to easily get them off). You could also add a second virtual disk, put an NTFS partition on it (within the VM) and copy to that if you plan to rebuild the OS drive.

    If you need the offsets of the partitions you could also mount them from the disk image directly via a loopback device, but that’s a bit more complicated.

    When dealing with Windows either on bare metal or VMs, I’ve often found it useful to store my more important data on a second disk so that I can easily back it up and it will survive across a wipe+reinstall of the OS.

    • tubbaduOP
      link
      English
      26 months ago

      This is a good life lesson I think XD i’m downloading a live iso as I don’t have one and i’ll boot the vm from there as soon as the download finishes
      Thanks for the answer!

    • tubbaduOP
      link
      English
      26 months ago

      I achieved to retrieve my files!!! thank you very very very much! Now I can try more “dangerous” way to resurrect it because my data are now safe in my USB drive

      • @phx@lemmy.ca
        link
        fedilink
        26 months ago

        Glad it worked for you. Your could also try and of the recovery options after booting from a Windows ISO. I think there are a few things that can do there that aren’t in the boot-failure recovery menus.

        If not, then at least your data is safe for a reinstall

  • @Synthead@lemmy.world
    link
    fedilink
    English
    56 months ago

    My least favorite thing about Windows, above all things, is that it’s extremely difficult to discover what’s wrong with it. People just try random things until it works in most cases.

  • @0x4E4F@infosec.pub
    link
    fedilink
    English
    36 months ago

    It may be just file corruption. Try running chdsk.exe /f C: in the command prompt. If that doesn’t work, try dism.exe /online /cleanup-image /restorehealth. Keep your virtual NIC online for the second command, it may try to download updates from MS if local files are corrupt and the WinSxS backups are corrupt as well.

    • tubbaduOP
      link
      English
      16 months ago

      Thanks for the answer! The first command says chdks.exe is not recognized as an internal oe external command, and the second commands says Error: 87 cleanup-image option is unknown

      • @0x4E4F@infosec.pub
        link
        fedilink
        English
        26 months ago

        Sorry, chkdsk.exe /f C:… it was late, I was tired 🤷.

        Error: 87 cleanup-image option is unknown

        Try it without the cleanup-image switch.

        • tubbaduOP
          link
          English
          16 months ago

          It says “cannot open volume for direct access” :(

          Running the second command without cleanup-image flag says the same thing for restorehealth, and running without it too well, has no options after /online so fails

          Thank you very much for your time!

          • @0x4E4F@infosec.pub
            link
            fedilink
            English
            2
            edit-2
            6 months ago

            The prompt doesn’t run as admin. Try this command, should open up a second command prompt as admin: runas /username:{AdminUsername} cmd.

  • Johannes Jacobs
    link
    fedilink
    36 months ago

    Can you post a screenshot of the BSOD? This is really not much info to go on :)

    But if you can access the command prompt, then your installation is still accessible, and so are your files. But its easier to diagnose if we know the actual error codes etc.

    • tubbaduOP
      link
      English
      26 months ago

      Thanks for the answer! There is no error code, the first thing showing up is a blue screen that makes me choose the keyboard layout, and after it the various recovery options (cmd, uninstall updates, etc)

      • Johannes Jacobs
        link
        fedilink
        3
        edit-2
        6 months ago

        So no BSOD then, you enter the preboot.environment :) does it also say “continue to boot to windows” or something?

        I dont think you need to reinstall, theres several ways to fix it :) we just have to figure out how knowledge you have, and what options the preboot environment has ;-)

        • tubbaduOP
          link
          English
          26 months ago

          I… I… I don’t know what happened, I was doing random stuff in the bios and… It booted up… Finished its upgrades… And now it’s working… I have no idea what happened…

  • @Astaroth@lemm.ee
    link
    fedilink
    2
    edit-2
    6 months ago

    Been a while since I had a VM but iirc it was pretty easy to have a shared directory to the VM, which is very useful to (obviously) share files but it also means that since the files aren’t actually on the VM itself they’ll still be there even if you remove the VM since they’re not part of the image.

     

    How I learned my lesson to have a shared directory was this: I had been having audio issues on the VM and at one point just decided to start over with a new VM, completely forgetting that the files I had been working on for a project were part of the VM and would be gone.

    • tubbaduOP
      link
      English
      16 months ago

      XD I think I learned the lesson too

  • @db2@sopuli.xyz
    link
    fedilink
    1
    edit-2
    6 months ago

    Bob the Builder meme

    But really, try booting a portable version of Windows like it’s a CD or USB in the VM.

  • @rImITywR@lemmy.world
    link
    fedilink
    English
    16 months ago

    Do you have an earlier snapshot that you can roll back to? If not then this is a learning experience about how you should take a snapshot before doing any configuration changes/updates. And also maybe some automatic ones on a schedule (daily/weekly).

    As far as recovering files, you could try the Windows recovery environment (or whatever they call it). Take a snapshot first, in case it makes things worse.

    You could also try mounting the virtual disk to your host system. https://www.baeldung.com/linux/mount-qcow2-image

    Or try booting the VM with a live boot environment of your favorite distro, similar to how you would do recovery from a dead physical machine.

    • tubbaduOP
      link
      English
      16 months ago

      I don’t have any, I didn’t think it was necessary to just run 2 softwares… But I was wrong :(

      And also maybe some automatic ones on a schedule (daily/weekly)

      Don’t Windows do it automatically? I though it was more stable than this :/

      Or try booting the VM with a live boot environment of your favorite distro, similar to how you would do recovery from a dead physical machine.

      I’ll try this as soon as I can, thanks for the help! I’ll post here any news