Most of the time there is no 1:1 replacement, it all depends on which features you use from these apps.
Some suggestions:
AMD Software
CoreCtrl can do most of the important stuff from the AMD software like GPU overclocking, custom fan curves and per-game profiles.
Logitech Ghub
Piper has a lot of support for different mice and keyboards, maybe yours are supported there?
Realtek audio
I’m not sure what Realtek audio does nowadays, which features do you need?
Video recording
OBS is available and does pretty much does the same stuff as on Windows. If you need to capture gameplay you will have to install obs-vkcapture which is the Vulkan/OpenGL replacement for DirectX capturing included on the Windows version of OBS.
Audio settings
Which settings do you require? What do you mean with “Audio quality”?
Unfortunately most Pipewire/Wireplumber settings are hidden behind config files and I’m not aware of any applications to manage them. The KDE audio settings are quite decent but limited in scope. However, most of the Pipewire settings have a sensible default and probably shouldn’t be changed unless you’re doing audio production.
qpwgraph is quite powerful when you need to connect multiple devices together or have virtual audio devices.
Okay update: Piper does support my mouse. Which is good, because I can now config the profiles without windows. But also sad, because I’m still having my scroll wheel problem. I’ll say it briefly maybe you know something about it. My mouse send hight res and normal scroll ups and downs inconsistently. When I scroll wirelessly it sends 5 hi res events, which get’s turned into a normal one, so it sends both. the 5 events is inconsistent, so sometimes I don’t even scroll. What apps use is inconsistent, so sometimes i scroll 5 times instead of 1, or even worse when apps wait for the 5 hi res next to each other, meaning it doesn’t even scroll sometimes. But all of this is gone when I plug in. When wired my mouse only sends “normal” scroll events and everything works perfectly. I got the leads: ([1], [2], [3], [4]) (I have to admit, I haven’t read all of these, at one point they just turned into technical gibberish for me)
They say sex is good and all, but I bet they never received a reply like this before. I’m going to respond one by one.
I mostly used AMD Software for instant replay, I miss this loads. Tried replay-sorcery like 3 times, failed all 3 times. I gained more knowledge since, fixed discord’s screenshare, so I might give it another shot, but I also heard that you can get instant replay with OBS somehow.
I’d like some alternative to fancontrol, I know I could set fanspeed in the bios, idk why I don’t. But I had a nice lil software that managed fans, now I don’t.
Piper also doesn’t support my mouse. It does however support the one I just switched from a month ago…
Idk what Realtek does, but I never had any sound related problems on windows. AKA it just worked, I’d like it back pls. I now use pipewire-pulse. Made Virtual Surround sink, loving the customization, hating the documentation. I’d still like to fix the bandwidth (I read somewhere that it’s limited by default) and mess around with EQs, my lead is AutoEq.
OBS just doesn’t work. But I remember it barely working on windows as well. It’s popular, I can probably fix it.
I already have qpwgraph, but I don’t have a use for it, I just used it to visualize, and fix connections when they’re wrong. Might do some soundboard fun later with it, or in-game mic trolling :p
Thanks for the links tho, I’ll look into what I can utilize. But don’t get me wrong I love linux, there is just so little support, paired with such a steep learning curve.
rant: I’m not using linux for long, and I have a bunch of stuff to get working. Password manager, find nice image and PDF viewers (web browsers feels cheap), fix recording (obs can’t capture and barely can anything else), get (or make) a nice theme, try out tiling window managers, set-up WMs so I don’t have to dual boot anymore. While don’t even get me started on stuff I have no Idea how works on linux. Like grep’s powerful, how does regex work, links?, everything in /etc, bash script. hopefully I can get these answered in 2024. I hear the memes that this is the “year of linux desktop”; well it’s certainly for me.
Which distro do you use? I don’t really have much sound issues here and I have a pretty exotic setup.
I mostly used AMD Software for instant replay, I miss this loads. Tried replay-sorcery like 3 times, failed all 3 times. I gained more knowledge since, fixed discord’s screenshare, so I might give it another shot, but I also heard that you can get instant replay with OBS somehow.
Yes, I use OBS for that. The feature is called “Replay Buffer” and I have it running with no issues with hardware encoding. I would recommend you use the OBS flatpak, depending on your distro you might also want to use Steam in a Flatpak to make things easier.
I’d like some alternative to fancontrol, I know I could set fanspeed in the bios, idk why I don’t. But I had a nice lil software that managed fans, now I don’t.
I’m not aware of a software that controls all fans but I didn’t really look since I just let them do what they want. CoreCtrl can do the GPU fan but I also leave that alone.
Piper also doesn’t support my mouse. It does however support the one I just switched from a month ago…
You might have some luck requesting support for your mouse/keyboard on their git page, maybe support can be added.
Idk what Realtek does, but I never had any sound related problems on windows. AKA it just worked, I’d like it back pls.
What does not work?
I’d still like to fix the bandwidth (I read somewhere that it’s limited by default)
There’s no bandwidth limit on Pipewire that I’m aware of. The default sampling rate is 48000 if you mean that but it’s a sensible default and you probably don’t want to change it.
and mess around with EQs, my lead is AutoEq.
AutoEq sounds good. EasyEffects definitely can do your EQ and much much more.
there is just so little support, paired with such a steep learning curve.
The learning curve can be steep but don’t be afraid to ask, there’s a lot of helpful people on here. Also most Github/Gitlab projects might look intimidating but they also gladly offer support for applications there.
PDF viewers
Okular is included with KDE and is pretty competent.
Like grep’s powerful, how does regex work, links?, everything in /etc, bash script. hopefully I can get these answered in 2024.
Those are not strictly needed in order to “use” Linux but if you want to learn about them you there’s a lot of resources for them out there. ChatGPT is also pretty useful in helping with bash scripts/commands since they’re sometimes hard to read.
Thank you. I’ll look into this “Replay Buffer” and OBS in general, as it doesn’t work atm. I’m on Arch, and when I plugged in my laptop to the TV via HDMI it didn’t play any sound. With some brute force commands (can’t remember, could maybe check history) I managed to play a static noise on the TV, but I couldn’t get it recognized as an audio device. Gave up after a while as we just wanted to watch the movie, so we found another way instead of me holding up my family with debugging.
Basically the same as in Windows: Keepass with manual sync between devices(using Syncthing for example) or Bitwarden (Vaultvarden if like you like to selfhost and don’t have enterprise account).
Most of the time there is no 1:1 replacement, it all depends on which features you use from these apps. Some suggestions:
CoreCtrl can do most of the important stuff from the AMD software like GPU overclocking, custom fan curves and per-game profiles.
Piper has a lot of support for different mice and keyboards, maybe yours are supported there?
I’m not sure what Realtek audio does nowadays, which features do you need?
OBS is available and does pretty much does the same stuff as on Windows. If you need to capture gameplay you will have to install obs-vkcapture which is the Vulkan/OpenGL replacement for DirectX capturing included on the Windows version of OBS.
Which settings do you require? What do you mean with “Audio quality”?
Unfortunately most Pipewire/Wireplumber settings are hidden behind config files and I’m not aware of any applications to manage them. The KDE audio settings are quite decent but limited in scope. However, most of the Pipewire settings have a sensible default and probably shouldn’t be changed unless you’re doing audio production.
qpwgraph is quite powerful when you need to connect multiple devices together or have virtual audio devices.
Even on Windows obs is the best performing option, last I tried (which was a few years ago granted)
Okay update: Piper does support my mouse. Which is good, because I can now config the profiles without windows. But also sad, because I’m still having my scroll wheel problem. I’ll say it briefly maybe you know something about it. My mouse send hight res and normal scroll ups and downs inconsistently. When I scroll wirelessly it sends 5 hi res events, which get’s turned into a normal one, so it sends both. the 5 events is inconsistent, so sometimes I don’t even scroll. What apps use is inconsistent, so sometimes i scroll 5 times instead of 1, or even worse when apps wait for the 5 hi res next to each other, meaning it doesn’t even scroll sometimes. But all of this is gone when I plug in. When wired my mouse only sends “normal” scroll events and everything works perfectly. I got the leads: ([1], [2], [3], [4]) (I have to admit, I haven’t read all of these, at one point they just turned into technical gibberish for me)
Can’t say I ever had that problem, sorry. My Logitech PRO X scrolls normally over wireless and wired.
well, alright. Thanks for your time and replies!
They say sex is good and all, but I bet they never received a reply like this before. I’m going to respond one by one.
I mostly used AMD Software for instant replay, I miss this loads. Tried replay-sorcery like 3 times, failed all 3 times. I gained more knowledge since, fixed discord’s screenshare, so I might give it another shot, but I also heard that you can get instant replay with OBS somehow.
I’d like some alternative to fancontrol, I know I could set fanspeed in the bios, idk why I don’t. But I had a nice lil software that managed fans, now I don’t.
Piper also doesn’t support my mouse. It does however support the one I just switched from a month ago…
Idk what Realtek does, but I never had any sound related problems on windows. AKA it just worked, I’d like it back pls. I now use pipewire-pulse. Made Virtual Surround sink, loving the customization, hating the documentation. I’d still like to fix the bandwidth (I read somewhere that it’s limited by default) and mess around with EQs, my lead is AutoEq.
OBS just doesn’t work. But I remember it barely working on windows as well. It’s popular, I can probably fix it.
I already have qpwgraph, but I don’t have a use for it, I just used it to visualize, and fix connections when they’re wrong. Might do some soundboard fun later with it, or in-game mic trolling :p
Thanks for the links tho, I’ll look into what I can utilize. But don’t get me wrong I love linux, there is just so little support, paired with such a steep learning curve.
rant: I’m not using linux for long, and I have a bunch of stuff to get working. Password manager, find nice image and PDF viewers (web browsers feels cheap), fix recording (obs can’t capture and barely can anything else), get (or make) a nice theme, try out tiling window managers, set-up WMs so I don’t have to dual boot anymore. While don’t even get me started on stuff I have no Idea how works on linux. Like grep’s powerful, how does regex work, links?, everything in /etc, bash script. hopefully I can get these answered in 2024. I hear the memes that this is the “year of linux desktop”; well it’s certainly for me.
Which distro do you use? I don’t really have much sound issues here and I have a pretty exotic setup.
Yes, I use OBS for that. The feature is called “Replay Buffer” and I have it running with no issues with hardware encoding. I would recommend you use the OBS flatpak, depending on your distro you might also want to use Steam in a Flatpak to make things easier.
I’m not aware of a software that controls all fans but I didn’t really look since I just let them do what they want. CoreCtrl can do the GPU fan but I also leave that alone.
You might have some luck requesting support for your mouse/keyboard on their git page, maybe support can be added.
What does not work?
There’s no bandwidth limit on Pipewire that I’m aware of. The default sampling rate is 48000 if you mean that but it’s a sensible default and you probably don’t want to change it.
AutoEq sounds good. EasyEffects definitely can do your EQ and much much more.
The learning curve can be steep but don’t be afraid to ask, there’s a lot of helpful people on here. Also most Github/Gitlab projects might look intimidating but they also gladly offer support for applications there.
Okular is included with KDE and is pretty competent.
Those are not strictly needed in order to “use” Linux but if you want to learn about them you there’s a lot of resources for them out there. ChatGPT is also pretty useful in helping with bash scripts/commands since they’re sometimes hard to read.
Thank you. I’ll look into this “Replay Buffer” and OBS in general, as it doesn’t work atm. I’m on Arch, and when I plugged in my laptop to the TV via HDMI it didn’t play any sound. With some brute force commands (can’t remember, could maybe check
history) I managed to play a static noise on the TV, but I couldn’t get it recognized as an audio device. Gave up after a while as we just wanted to watch the movie, so we found another way instead of me holding up my family with debugging.Basically the same as in Windows: Keepass with manual sync between devices(using Syncthing for example) or Bitwarden (Vaultvarden if like you like to selfhost and don’t have enterprise account).
I’d use a desktop environment defaults, but https://wiki.archlinux.org/title/List_of_applications
Awk and sed are great too. Sed will also turn 50 this year.
It’s magic. You can(and should) test your regex here https://regex101.com/